View Datasheet
 View Product Manual

The ID2-N MIMO is an enterprise grade mesh wi-fi access point, capable of operating in high bandwidth demand, client-intensive environments. This robust product features two high powered radios – a 400mW 802.11n mesh radio and a 400mW 802.11n client radio.This featured two-radio design is ideally suited for use in mesh gateway/repeater applications –
one radio dedicated for meshing with other AWD access points (creating a self-forming, selfhealing network architecture) while the second radio is dedicated for client access. The core of  this access points capabilities are provided through the AWD CloudController – where the network administrator can remotely monitor and configure the network from an advanced and intuitive interface.

When plugged in, the ID2-N MIMO automatically connects to the CloudController, downloads its configuration, and joins the appropriate network. It self optimizes, determining the ideal channel, transmit power, and client connection parameters. Additionally, the ID2-N MIMO self heals, responding automatically to switch failures and other errors.

The ID2-N MIMO is housed in a slim (1.4”) and attractive ABS and steel, plenum enclosure and is capable of being desktop, wall or ceiling mounted. This enclosure also houses multiple high gain antennas, providing full MIMO capabilities. The total capable throughput of this device is 600 megabits: 300 megabits on the mesh radio and 300 megabits on the client radio. As a repeater, the ID2-N MIMO provides wi-fi connectivity while acting as a wired network connection for terminal network devices via the 802.3af POE enabled RJ45 port.

• Full control via the CloudController
• LAN Bridging – even supports VLAN tagging across the mesh!
• Fully Supported Over the Air Firmware Updates
• High output power radios (400mW Mesh Radio)
• Full (300Mbps) 802.11n client & mesh speeds
• Slim, Plenum Rated Enclosure
• Three internal high-gain antennas
• 802.3af Compliant (48V Max)
• Hardware Watchdog for Reliability

* Power Supply/POE Sold Separately.

High User Density Deployments

• Two radios mesh devices serve many times as many clients as single radio access points.
• Two radio design allows for higher propagation of bandwidth per access point.

Performance Critical Networks

• Provide high-speed access to support bandwidth intensive applications such as streaming video.
• The highest performance (300Mbps) is achieved when each AP is connected as a gateway.

Networks Requiring Sophisticated Mesh

• Dual-radio design allows several access points to wirelessly share the same connection with minimal drop in client performance.
• Reduced installation cost due to fewer required gateways.

Networks in Challenging Interference Environments

• Environments with high levels of RF interference.
• Buildings/networks saturated with 2.4 GHz can benefit from operating mesh at 5 GHz.