View Datasheet
View Product Manual
The AWD OD2-N MIMO is a enterprise grade mesh wi-fi access point, capable of operating in high bandwidth demand, client-intensive environments. This robust product features two high-powered, Atheros-based radios – a 400mW 802.11n mesh radio and a 400mW 802.11n client radio. This featured two-radio design is ideally suited for use in mesh gateway/repeater applications – one radio dedicated for meshing with other AWD access points (creating a self-forming, self-healing network architecture) while the second radio is dedicated for client access. The core of this access points capabilities are provided through the AWD CloudController – where the network administrator can remotely monitor and configure the network from an advanced and intuitive interface.
When plugged in, the OD2-N MIMO automatically connects to the CloudController, downloads its configuration, and joins the appropriate network. It self optimizes, determining the ideal channel, transmit power, and client connection parameters. Additionally, the OD2-N MIMO self heals, responding automatically to switch failures and other errors. The OD2-N MIMO features three N-Type antenna connectors for custom antenna application, and comes encased in a rugged NEMA 6 hinged aluminum enclosure. 600 megabits: 300 megabits on the mesh radio and 300 megabits on the client radio. As a repeater, the OD2-N MIMO provides Wi-Fi connectivity while acting as a wired network connection for terminal network devices via the 802.3af POE enabled RJ45 port.
- Full control via the CloudController
- LAN Bridging – even supports VLAN tagging across the mesh!
- Fully Supported Over the Air Firmware Updates
- High output power radios (400mW)
- Full (300Mbps) 802.11n client & mesh speeds
- Rugged, Die-Cast Aluminum Enclosure (NEMA 6 Rated)
- Four N-Type Antenna Connectors (2 Mesh, 2 Client)
- 802.3af Compliant (48V Max)
- Hardware Watchdog for Reliable Remote Use
* Antenna’s and power supply sold separately.
High User Density Deployments
- Two radios mesh devices serve many times as many clients as single radio access points.
- Two radio design allows for higher propagation of bandwidth per access point.
Performance Critical Networks
- Provide high-speed access to support bandwidth intensive applications such as streaming video.
- 600Mbps of total available AP throughput.
Networks Requiring Sophisticated Mesh
- Dual-radio design allows several access points to wirelessly share the same connection with minimal drop in client performance.
- Reduced installation cost due to fewer required gateways.
Networks in Challenging Interference Environments
- Environments with high levels of RF interference.
- Buildings/networks saturated with 2.4 GHz can benefit from the mesh radio operating at 5 GHz.
Radios
- Two 802.11n MIMO 400mW Radio
- Concurrent operation in 2.4 and 5 GHz bands (Operate Mesh @ 5 GHz and Clients at 2.4 GHz)
- Total max radio rate of 600Mbps (300Mbps per radio)
Frequency
US
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.725 -5.825 GHz (UNII-3)
Europe
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350, 5.470-5.725 GHz (UNII-2)
Power
- Power over Ethernet: 48V Max (802.3af Compliant)
- Power Consumption: 12W max; 7 W typical
- Power over Ethernet Injector & Power Adapter Available Separately
- Advanced Power Save Mode
Mounting
- Wall/Surface Mount
- Pole Mount
Environment
- Operating temperature: – 22° F to 167° F (-30° C to 75° C)
- Solar Heat Rise = ≤ 5° C above external ambient (When Powered Off)
- Humidity: 5 to 90% non-condensing
- NEMA 6 Enclosure Rating
- IP68 RJ45 Cable Bulkhead
Physical Dimensions
- 10” x 7.1” x 2.25” (181 mm x 156 mm x 51 mm)
- Weight: 80 oz (2.27 kg)
Antennae
- Four N-Type Antenna Connectors
Interfaces
- 1 x 10/100 Base-T (RJ45) with < 48VDC/802.3af POE (WAN)
Transmitters (Output Power/Receive Sensitivity)
- Please consult product datasheet
Regulatory
Product Safety Certifications
- RoHS
- FCC
- CE
Warranty
One Year Hardware Warranty Included
